Tuesday, September 24, 2013

TROUBLESHOOTING 

Here are some steps to take before making a service call. These easy steps may save you $100 or more service call.

 If you are still having problems with your pool in Las Vegas 

the one to call is Rick the Pool Dude. For totally awesome pool service. 702-448-2483

 

PUMP WILL NOT TURN ON

  1. Check to see if the time clock is on.
  2. Check breakers at pool time clock panel.
  3. Check breakers at house main panel.

PUMP WILL NOT PRIME

  1. Make sure pump lid and 0-ring are on properly.
  2. Clean pump basket and skimmer basket.
  3. Make sure the water level of the pool is correct.
  4. Make sure the skimmer opening is free of debris and that the flap is not stuck shut.
  5. Make sure the filter is clean.
  6. FILTER PRESSURE FLUCTUATES UP AND DOWN

    1. Follow the same directions as above for pump will not prime.
    HOW TO RE-PRIME PUMPS
    1. Shut off pump.
    2. Remove pump lid.
    3. Fill pump pot with water.
    4. Replace lid, making sure that the 0-ring is clean and properly in place.
    5. Turn on pump.
    6. Bleed air from filter tank using air relief valve.
    7. Repeat steps I through 6, two or three times if necessary.

    HEATER DOESN’T WORK

    1. Check thermostat for proper range.
    2. Check to see if toggle switch is on.
    3. Make sure that the filter, pump pot basket and skimmer basket are clean.
    4. Check to make sure that all the valves are in the proper positions.
    5. Make sure the pump is turned on.

No comments:

Post a Comment